Throttle Position Sensor
GS7881
Test notes: This type of sensor should be tested on the sensors test module with LCD display. To perform the test, follow the procedure: 1. Connect the sensors test cables (PU02) to the available inputs below the LCD display and the smaller terminals on the sensor to be tested, as shown in the image. The two signals must be tested separately. First perform the test by connecting the green cable to IN1 2. Adjust the LCD display to show the voltage value: "VOLTS" 3. Slowly rotate the sensor mechanism while observing the bar graph and voltage displayed on the LCD display. The voltage should vary between 0V and 4V and the bar should increase continuously 4. Change the green cable to IN2 and repeat the test
Order: + IN IN -